The Metal Roof Installation Process You Should Know About

Ensuring that the house undergoes a metal roof installation process can bring comfort to its inhabitants. When a storm hits the region, for instance, the metallic sheets can shield you from rain, snow, or wind. Once the summer comes, they can also insulate the place better than other roofing materials.

But then again, nothing stays the same forever, right? The current cover you have may need a replacement after years of taking a beating from the natural forces. Even so, we can’t recommend doing it yourself, because the task isn’t as simple as repainting the walls.

Below are the steps you can expect to see in the procedure.

8 Steps for the Metal Roof Installation Process

  1. Determine the surface area.

The purpose of measuring the roof beforehand is to make sure that you won’t have to cut the sheets on-site. Estimating its length from the ground is one way to accomplish it. For a more precise calculation, however, you can climb to the top and measure it right there.

  1. Choose the metal panels.

Manufacturers make use of various metals to create the roofs. It’s your job as the homeowner to decide on the kind that will be installed on your shelter. Here is a quick breakdown of the available options: https://www.youtube.com/watch?v=sYeMSmp6J3E

  1. Take away the old sheets.

The third step is practically the start of the metal roof installation process. With the new panels in your possessions, get rid of the existing pieces from top to bottom.

  1. Waterproof the base.

It is necessary to set a foundation prior to the sheets to guarantee that water won’t seep in the house. Either a tar paper or a roofing felt will work nicely for this procedure.

  1. Attach the edging.

Next, fix the metal trims on the edges of the covering. They serve as borders for the panels, so fasten them on the right places.

  1. Lay down the sheets.

For step #6, there are two simple rules to follow:

  • Let the metal pieces overlap each other; and
  • Secure every piece with nails or screws before moving on to the next one.
  1. Conceal the joint and the edges.

You should then bolt another set of metal trim on its perimeter to smoothen the surface. This time, a curved flashing goes at the highest point of the roof, considering it is V-shaped.

  1. Re-inspect the work.

The last phase of the procedure is to check the entire roof one more time. What matters is that there are no missing screws on this covering. It’s more appropriate to look for loose areas while you’re up there instead of only when water leaks through them.

In Summary

The steps above show how a metal roof installation process typically goes. It seems easy in general, but you need an expert’s help to ascertain that the end-product lasts over 50 years.

That, of course, is something that our professionals can guarantee. We also lifetime roofing warranty, so you never need to worry about the shelter again. For quick estimation, contact us at 647-667-9962 or email us at info@dreamroof.ca.